产品

summit泵

 
 
Brochure (601k)

Installation, Operation, & Maintenance Manual (4559k)

 
Capacities to 6000 gpm
Heads to 730 feet
Pressures to 375 psi
Temperatures to 700 degrees F
Back pull out design
External impeller adjustment
Maximum interchangeability
Standard bronze Inpro® labyrinth seals
Heavy duty shaft & bearings
Rigid frame foot
Fully open impeller
Extra large oil sump
 

Finned-tube Oil Cooler: Can be installed in field

 
Utilizes your existing 2196 power end and ANSI bolt pattern

Handles fibrous and shear sensitive materials
Minimizes degradation of solids
Available in 5 different sizes and a variety of materials

 
 
Brochure (2513k)

 
Radial vane impeller with balance holes
Interchangeability with existing ANSI pumps
Circular non-expanding case

Reduced shaft vibration
Lower NPSHr
Lower seal chamber pressure
Extended MTBF on the pump and mechanical seal

Additive Chemicals
Batch/Continuous Chemical Reactors
Chemical Dryers
Chemical Process
Condensate Service
Evaporators
Petro Chemical Service
Prototype Processes
Shower Service
Seal Water

 
 
Brochure.pdf (847k)

 
Rear pull-out
Efficient parts interchangeability
Sacrificial wear items
Double wall volute on larger sizes
 

Pulp & Paper:
Cleaners, filtrate, liquor, screen rejects

Steel:
Cooling water, descaling, slurries, tailings

Food:
Beet and cane sugar, cane juices, fruit pulp, wet corn milling

General:
Manure transfer, mine water, waste treatment

 
 
Brochure (1986k)

 
Rear pull-out
External axial impeller adjustment
Inpro/Seal bearing isolators standard
Open non-clogging impeller

Chemical Transfer
Industrial Sump
Mine Dewatering
Bilge Water Removal
Filter System

 
 
Brochure (1693k)

 
Summit CC & FM pumps are horizontal, end suction, centrifugal pumps designed for general service such as water, solvents, light oils, non-corrosive chemicals, coolants and brines. Available in capacities to 2300 GPM and heads to 200 feet, these pumps are an economical and dependable solution for your pumping needs. All flanges are 125lb ANSI B16.1 rating, NPT connections are standard on 6" and 8" sizes. A renewable bronze shaft sleeve is standard on cast iron pumps, and a 316SS shaft sleeve is standard on alloy pumps.

Close Coupled Pump - Model CC
The close coupled pump is directly mounted to a NEMA "C" face motor, and designed to use minimal space. Motors with TEFC frames use a standard mechanical seal (JM frame), or packing(JP frame). ODP motors, and stainless steel shafts are optional.

Frame Mounted Pump - Model FM
Frame mounted pumps are constructed with a rigid bearing frame, flexibly coupled, and mounted on a fabricated steel base with optional drip pan. Casings, adaptors, and bearing frames share mating registers for maximum interchangeability. Coupling guards meet ASME B 15.1 specifications.

Interchangeable Parts
Component parts, of similar sizes, are interchangeable between frame mounted and close coupled pumps. This means less spare parts inventory and fast delivery of required parts.

316SS wet ends are available for corrosive applications. All wetted surfaces are constructed of 316SS including: Casing, Impeller, Adaptor, Shaft, Sleeve, Washer, Impeller Screw, and Key.

 
 
Brochure (294k)

Installation, Operation, & Maintenance Manual (4305k)

 
Indexed bearing housing for easy and accurate impeller adjustment
 

Tarby progressing cavity pumps are designed to handle both abrasive slurries and highly viscous fluids, over a wide range of demanding industrial applications: chemicals, petroleum, paints and coatings, pulp and paper, and food processing. Tarby's precision tolerances and progressive cavity design also provide dependable performance for metering applications, inherent in chemical and pharmaceuticalproduction.
 
 

Capacities to 750 GPM @ Pressures to 500PSI

The Century V series is a state-of-the-art workhorse progressive cavity pump, designed for heavy-duty service. Tarby Century V delivers high performance and reliability for all types of industrial applications, such as pump and paper mill service, and wastewater treatment plants. Tarby offers additional models as bolt-in replacement pumps for many existing applications.

Capacities to 100 GPM @ Pressures to 150 PSI

The Century IV features an open throat design that feeds the progressing cavity and is ideal for handling fluids with high solids content. Typical applications include chemical slurries and transfer of food waste byproducts.

Capacities to 400 GPM @ Pressures to 760 PSI

Tarby's general purpose Century III Series is available in a wide range of models and flow rates. Count on the Century III Series for dependable performance in a broad range of applications.

Parts engineered to fit most major brands including:

GouldsWorthingtonTarby 
Durco Allis Chalmers Warren 
Roper Peerless Ahlstrom 
Moyno® Gorman Rupp Summit 

Over $1,000,000.00 in inventory including complete pumps, casings, impellers, stuffing box covers, power ends, rotors, stators, and more. Engineered to fit popular brands as Goulds, Durco,Summit, Peerless,Warren, Allis Chalmers, Moyno®,Worthingtonand more.