供应

5KN金属材料高温拉力试验机

型号：BWN

5KN金属材料高温拉力试验机 符合标准：

GB/T4338-1995 High temperature tensile testing machine for metal materials

model: BWN

GB/T4338-1995 High temperature tensile testing machine for metal materials meets the standard:

GB/T4338-1995 High temperature tensile test for metallic materials

GB/T4338-1995 High temperature tensile testing machine for metal materials Application scope:

It can conduct mechanical property testing and analysis research on metals and non metals, including tensile, peeling, compression, bending, etc. According to standards such as GB, JIS, ASTM, DIN, ISO, etc., the maximum test force value, fracture force value, yield strength, upper and lower yield strengths, tensile strength, various elongation stresses, various elongation rates, compressive strength, bending deflection, elastic modulus, constant elongation stress, constant stress elongation and other parameters can be automatically calculated.

Tensile testing machines are widely used in industries such as aerospace, petrochemicals, machinery manufacturing, vehicle manufacturing, wires and cables, textile fibers, plastic rubber, ceramics, food, pharmaceutical packaging, aluminum-plastic pipes, plastic doors and windows, geotextiles, films, wood, paper, metal materials and products.

GB/T4338-1995 Composition of High Temperature Tensile Testing Machine for Metal Materials:

The universal material testing machine is composed of a measurement system, a drive system, a control system, and a computer (computer system type tensile testing machine).

GB/T4338-1995 Technical specifications for high temperature tensile testing machine for metal materials:

Maximum test force (kN) 5kN

Testing machine measurement accuracy level 1 (standard version)

Effective force range 2% -100% FS/

Resolution of 1/300000

Relative error of indication ? 1%

Speed adjustment range 0.05~500mm/min (stepless speed regulation)

Accuracy better than ? 1% of the indicated value

Force control rate control range 0.05-5% FN

Measurement range: 0-999mm

Resolution 0.001mm

Measurement accuracy better than ? 1% of the indicated value

Weight approximately 120KG

Temperature range for use: 10 ? C to 35 ? C; Humidity: 30% -85%;

主机配置

1)  高强度主机一台（单臂式结构 双柱式结构）可选

2)  高精度光电编码器一只

3)  全数字调速系统和全数字调速电机各一套

4)  高精密滚珠丝杠副一套

5)  精密圆弧同步减速系统一套

6)  高精度负荷传感器一支

7)  专用拉伸辅具一套

8)  联想计算机一台

9)  喷墨打印机一台

10)  AD800万能试验卡一套

11)  WINDOWS98/2000/XP操作环境下的试验机专用软件一套

软件说明

软件系统：中英文Windows2000/XP/Win7平台下软件包

自动储存：试验条件、试验结果、计算参数、标距位置自动储存。

自动返回：试验结束后，试验机横梁会自动返回到试验初始位置。

连续试验：一批试验参数设定完成后，可连续进行测试。

多种曲线：同一图形上可显示多种不同的曲线：荷重--位移、荷重-时间、位移--时间、应力—应变、荷重—两点延伸等到多种曲线。

曲线对比：同组试样的曲线可在同一张图上叠加对比。

报告编辑：可按用户要求输出不同的报告形式。

动态显示：测试过程中，负荷、伸长、位移及选中的试验曲线随着测试的进行，实时动态显示在主控屏幕上。

自动变标：试验中负荷、伸长等曲线坐标，如果选择不当，可根据实测值的大小，自动变换座标。保证在任何情况下曲线以最大的形式显示在屏幕上。

峰值保持：在测试的整个过程中，测试项目的最大值始终随着试验的进行，在屏幕窗口上显示。

执行标准：满足GB、ISO、JIS、ASTM、DIN等多种试验方法和标准。

维护与保养

1轴承内的润滑脂一般3—5年更换一次。

2 试验机应每年请当地计量部门检定一次。

常见故障及排除

     经过以上排查，还不能排除设备故障，请及时拨打我公司售后服务热线电话，由我公司专业技术人员协助解决，严禁用户私自打开设备进行维修，若私自打开设备进行维护，一切后果我公司不承担任何责任。

Host configuration

1) One high-strength host (single arm structure double column structure) is optional

2) One high-precision photoelectric encoder

3) One set of fully digital speed control system and one set of fully digital speed control motor

4) A set of high-precision ball screw pairs

5) A set of precision arc synchronous deceleration system

6) One high-precision load sensor

7) A set of specialized stretching aids

8) One Lenovo computer

9) One inkjet printer

10) One set of AD800 universal test card

11) A set of specialized software for testing machines under WINDOWS98/2000/XP operating environment

software documentation

Software system: software packages in both Chinese and English for Windows 2000/XP/Win7 platforms

Automatic storage: Test conditions, test results, calculation parameters, and gauge position are automatically stored.

Automatic return: After the experiment is completed, the crossbeam of the testing machine will automatically return to the initial position of the experiment.

Continuous test: After setting a batch of test parameters, continuous testing can be conducted.

Multiple curves: Multiple different curves can be displayed on the same graph, including load displacement, load time, displacement time, stress-strain, load two-point extension, and more.

Curve comparison: The curves of the same group of samples can be overlaid and compared on the same graph.

Report editing: Different report formats can be output according to user requirements.

Dynamic display: During the testing process, the load, elongation, displacement, and selected test curves are dynamically displayed in real-time on the main control screen as the test progresses.

Automatic scaling: In the experiment, if the coordinates of the load, elongation, and other curves are not selected properly, the coordinates can be automatically changed according to the size of the measured values. Ensure that the curve is displayed on the screen in its maximum form under any circumstances.

Peak holding: Throughout the entire testing process, the maximum value of the test item is displayed on the screen window as the experiment progresses.

Execution standards: Meet various testing methods and standards such as GB, ISO, JIS, ASTM, DIN, etc.

Maintenance and upkeep

The lubricating grease inside the bearing is usually replaced every 3-5 years.

The testing machine should be inspected by the local metrology department once a year.

Common faults and troubleshooting

Reasons and solutions for fault phenomena

After startup, there is no display controller power cord, fuse, switch, etc

Activate the power supply, fuse, switch, and control cables of the inactive host

After loading, the test force did not show whether the sensor was connected properly

Stability check of force value system grounding wire

Is the deformation sensor connected if there is no deformation after the crossbeam moves

Test force display maximizes sensor over range loading or sensor wire breakage

Check if the printer is equipped with a printer and if it is connected to the printer

After the above investigation, the equipment malfunction cannot be ruled out. Please call our company's after-sales service hotline in a timely manner and have our professional technical personnel assist in solving the problem. It is strictly prohibited for users to open the equipment for maintenance without authorization. If the equipment is opened for maintenance without authorization, our company will not bear any responsibility for any consequences.

售后服务。

1、保修期内非人为损坏的零部件免费更换，保修期内接到用户邀请后，最迟响应时间为4小时内，在与用户确认故障后，我公司会在48小时内派工程师到达现场进行免费服务，尽快查清故障所在位置和故障原因，并向用户及时报告故障的原因和排除办法。

2、提供实时的远程诊断和维护服务。

3、每年进行客户回访。

4、保修期外继续为用户提供优质技术服务，在接到用户维修邀请后2天内派工程师到达用户现场进行维修。并享有优惠购买零配件的待遇。

5、保修期内人为损坏的零部件按采购（加工）价格收费更换。

6、软件升级：终生免费提供新版本控制软件。

7、安装及调试合格后，自客户签字认可之日起，我方对于提供的产品免费保修三年。保修期满后，我方将继续跟踪服务，客户享受终生维修，负责及时提供必要的售后服务、技术咨询。

8、产品交货期：尽量按用户要求，若有特殊要求，需提前完工的，我公司可特别组织生产、安装，力争满足用户需求。

9、保修承诺：我司对本次协议供货有效期内所提供的所有产品保质期 ，有效期内所提供的产品，提供正常工作日全天侯服务，终身技术服务支持。

10、响应时间：保修期内，产品若发生故障，在接到贵公司报修后，24小时内帮客户解决问题。

11、服务体系：作为设备供应商本公司对本次招标所提供的产品提供保障体系： 当设备出现故障，必要时将派指定的专业技术员在规定时间内上门维修或寄修，产生的运费由本公司承担。

12、产品价格承诺1、在同等竞争条件下，我公司在不以降低产品技术性能、更改产品部件为代价的基础上，真诚以最优惠的价格提供给贵方。2、在保修期内供方将免费维修和更换属质量原因造成的零部件损坏，保修期外零部件的损坏，提供的配件只收成本费，由需方人为因素造成的设备损坏，供方维修或提供的配件均按成本价计。

13、售后服务保证

公司实力保障：本公司有完善的售后服务体系;