供应

橡胶高压漏电起痕试验机  特点：

试验仪由试验部分和控制部分组成采用一体化设计，方便现场安装和调试。试验箱外壳及结构件采用S304不锈钢或黄铜制造；电极头为不锈钢，耐高温耐腐蚀；滴液计数准确，控制系统稳定可靠。

橡胶高压漏电起痕试验机  技术参数
1.控制方式:PLC触摸屏(台湾威纶7寸彩屏)；

2.操作类型：无线电子摇控；

3.电极材料：铜 铂金；

4.每个电极对试样作用力：1.0?0.05N；

5.液滴时间：30s?0.1s；

6.施加电压：100～600V（48～60Hz）之间可调，短路电流在1.0?0.1A时电压下降不超过10%；

7.滴液装置：试验时不需要调整；

8.滴液高度：30～40mm；

9.滴液大小：44～55滴/1cm?

10.控制液滴采用电磁阀,精确的控制液滴的大小,20滴精度最大可达到0.02g；

11.判断回路：短路电流大于0.5A时间维持2秒钟继电器动作，切断电流，指示试品不合格；

12.内部容积：0.5m3（可选购0.75m3或1m3）；

13.外部尺寸: 宽1170mm*深630mm*高1330mm；

14.箱体材料：铁板喷涂；

15.排气孔：?100mm；

16.工作电源：AC 220V/50HZ/10A。

1、漏电起痕试验仪在操作过程中，人员应该注意个人防护，避免漏电受伤或被溶液沾染到口、眼部位造成伤害

2、输入电源AC220?2%。

3、排气管应通出窗外。

4、在对样品进行时,请勿打开仓门,待试验完之后或当实验失效产生火烟时，先打开风扇排除烟雾后，再打开仓门进行作业。

5、实验前须确认设备是否在计量有效期内，如超期则不能进行实验

6、电源应用有地线的三极插座，保证接地可靠。

characteristic:

The testing instrument consists of an experimental part and a control part, designed in an integrated manner for easy on-site installation and debugging. The outer shell and structural components of the test chamber are made of S304 stainless steel or brass; The electrode head is made of stainless steel, which is resistant to high temperature and corrosion; Accurate droplet counting and stable and reliable control system.

technical parameter

1. Control method: PLC touch screen (Taiwan Weilun 7-inch color screen);

2. Operation type: wireless electronic remote control;

3. Electrode material: copper platinum;

4. Force exerted by each electrode on the sample: 1.0?0.05N;

5. Droplet time: 30s?0.1s;

6. Applied voltage: adjustable between 100-600V (48-60Hz), with a voltage drop of no more than 10% when the short-circuit current is 1.0?0.1A;

7. Dropping device: No adjustment is required during the experiment;

8. Drop height: 30-40mm;

9. Drop size: 44-55 drops/1cm?

10. Electromagnetic valves are used to control the droplet size accurately, with a maximum precision of 0.02g for 20 droplets;

11. Circuit judgment: If the short-circuit current is greater than 0.5A, the relay will operate for 2 seconds to cut off the current and indicate that the test sample is unqualified;

12. Internal volume: 0.5m3 (optional 0.75m3 or 1m3);

13. External dimensions: width 1170mm * depth 630mm * height 1330mm;

14. Box material: Iron plate spray coating;

15. Exhaust hole: ? 100mm;

16. Working power supply: AC 220V/50HZ/10A.

matters needing attention

1. During the operation of the leakage trace tester, personnel should pay attention to personal protection to avoid injury caused by leakage or contamination of the mouth and eyes by the solution

2. Input power supply AC220?2%.

3. The exhaust pipe should lead out of the window.

4. When testing the sample, do not open the chamber door. After the test is completed or when the test fails and smoke is generated, turn on the fan to eliminate the smoke first, and then open the chamber door for operation.

5. Before conducting the experiment, it is necessary to confirm whether the equipment is within the valid measurement period. If it exceeds the period, the experiment cannot be carried out

6. The power supply should use a three pole socket with a grounding wire to ensure reliable grounding.

 北广产品销往北京、上海、广东、河南、浙江、河北、江苏、湖南、内蒙、山东、四川、广州、江西、西北、云南、深圳、吉林、南京、嘉兴、佛山、苏州、杭州、西安、潥阳、长春、江苏、平顶山、安徽、金水、金华、海南、廊坊、天津、成都、扬州、东莞、济南、南通、株洲、保定、贵州、宜兴、嘉兴、黑龙江、漳州、成都、重庆、咸阳、济南、绍兴、杭州、拉萨、山西、惠州、沧州、江西、沈阳、武汉、沈阳、昆明、鹤山、许昌、青海、宁波、醴陵、淄博、瑞安、阜新、合肥、长沙、常州、瑞安、青岛、无锡、济宁、醴陵、厦门、河源、乐清、烟台、福州、龙口、徐州、唐山等地销售。

 售后服务
一、安装调试：协助试验机的安装，负责试验机的运输、调试。
二、验收标准：试验机按订货技术附件进行验收。终验收在买方进行，对用户提供的试样进行试验，并提供测试报告。
三、培训：安装调试同时，在仪器操作现场一次性免费培训操作人员2-3名，该操作人员应是由需方选派的长期稳定的员工，培训后能够对设备基本原理、软件使用、操作、维护事项理解和应用，使人员能够独立操作设备对样品进行检测、分析，同时能进行基本的维护。
四、软件升级：终生免费提供新版本控制软件。