供应

弯曲、撕裂、剪切试验机【依据标准】

GB/T 16491、GB/T 1040、GB/T 8808、GB/T 13022、GB/T 2790、GB/T 2791、GB/T 2792、GB/T 16825、GB/T 17200、GB/T 3923.1、GB/T 528、GB/T 2611、GB/T 6344、GB/T 20310、GB/T 3690、GB/T 4944、GB/T 3686、GB/T 529、GB/T 6344、GB/T 10654、HG/T 2580、JC/T 777、QB/T 2171、HG/T 2538、CNS 11888、JIS K6854、PSTC-7、ISO 37、AS 1180.2、BS EN 1979、BSEN ISO 1421、BS EN ISO 1798、BS EN ISO 9163、DIN EN ISO 1798、GOST 18299、DIN 53357、ISO 2285、ISO 34-1、ISO 34-2、BS 903、BS 5131、DIN EN 12803、DIN EN 12995、DIN53507-A、DIN53339、ASTM D3574、ASTM D6644、ASTM D5035、ASTM D2061、ASTM D1445、ASTM D2290、ASTM D412、ASTM D3759/D3759M

结构特征及工作原理

本机由机械、电气二大部分组成(见附图)。

1机械部分结构及工作原理：

本机采用电动加载方式，底部是整机结构承载支架，内部包含有电机驱动器、加载电机、减速机构、动力传动机构等部件；上部是试样夹持及力值、位移测量机构，包含有试样拉伸夹具、测力传感器、位移传感器等主要部件。

2 电气部分：

    电气部分由显示测量控制部分组成。显示测量控制部分实现各种控制、显示、数据采集、处理等功能。软件部分的操作请仔细阅读《软件说明书》。

3 本机的几项主要功能：

3.1 全开放性参数设置

3.2 设置参数保存

3.3 浮动零点设置，可随时调整零点

3.4 峰值保持及存储，常值跟随；

3.5 在有效速度范围内，速度值任意设置；

3.6 横梁移动过程中的速度快捷切换功能

3.7 灵活的数据查询显示功能；

3.8 过载停机保护功能；

3.9 试验结束自动判断功能；

3.10 极限位置保护等；

Structure characteristics and working principle

This machine is composed of mechanical and electrical parts (see attached drawing).

1 Mechanical part structure and working principle:

The machine adopts electric loading mode, the bottom is the whole machine structure bearing bracket, which contains motor driver, loading motor, decelerating mechanism, power transmission mechanism and other components; The upper part is the sample holding and force value, displacement measuring mechanism, including the sample tension fixture, force sensor, displacement sensor and other main components.

2 Electrical part:

The electrical part consists of a display measurement control part. Display measurement control part realizes various control, display, data acquisition, processing and other functions. Please read the Software Manual carefully for the operation of the software.

3 Several main functions of the machine:

3.1 Fully open parameter Settings

3.2 Setting Parameters to Save

3.3 Floating zero setting, the zero can be adjusted at any time

3.4 Peak retention and storage, constant value follow;

3.5 Within the effective speed range, the speed value is set arbitrarily;

3.6 Quick speed switching function during beam movement

3.7 Flexible data query display function;

3.8 Overload stop protection function;

3.9 Automatic judgment function at the end of the test;

3.10 Limit position protection, etc.;

lInstallation acceptance:

1. Within 5 working days after the contract is signed, a notice of site preparation and installation requirements will be issued to the user, and engineers will provide on-site guidance to ensure that the site meets the installation requirements.

2. Provide the user with a detailed equipment supply list before delivery, make special instructions and instructions on whether all the goods included in the contract contain dangerous goods, or need to be refrigerated and frozen, and whether dangerous goods or special vehicles such as refrigerated trucks and shock-proof vehicles are required for transportation, and provide a full set of complete technical information with the equipment. Including instrument manual, operation manual, circuit general block diagram. After the goods arrive at the installation site specified by the user, both parties unpack and accept the equipment according to the equipment supply list.

3. Respond within 3 working days after receiving the user's installation notice, and complete the installation and commissioning free of charge within 10 working days. The final acceptance technical indicators shall be subject to the contents described in the quotation and technical data.

4. After the installation, debugging and acceptance of the instrument is completed, our company is responsible for immediately sending professional and technical personnel to the user's location for centralized training, so that they can master the performance of the instrument (including hardware and software), training time and training number are determined according to needs, but the training time is not less than 1 day. Training documents include: "On-site training Reference", "Technical Service Content", "User training Plan", "System Maintenance Manual".

5. After the centralized training, our company promises to open training classes from time to time to help users improve the operation and maintenance level of the instrument.

维修保养方法及注意事项:

1、机台部份，外表经常擦拭，保持清洁。

2、电镀部份请以机油擦拭，以防止生锈宜保光亮。

3、动力螺杆及螺杆部份请加润滑油，以保传动灵敏。（润滑油采黄油加入少许机油混合即可）。

4、面板（控制箱即显示器）请用乾布擦拭，严防沾水，以免损坏IC电子零件。

5、各项治具及接头配件请妥置，并擦拭防锈油，以防生锈。

6、上下班必需把电源关掉。

功能特点：采用国外先进技术，全数字放大、采集，显示稳定、精度高、使用方便。采用铝合金外罩，主机采用直流或交流伺服电机、精密减速机、高精度丝杠、具有传动平稳、噪音低、速度精度高、调速范围宽，使用寿命长等特点；液晶实时显示，可显示试验力、峰值、位移、速度、试验状态等，外观大方，使用方便，操作简单；具有限位、过载自动保护、试样断裂自动停机等功能。配置标准拉伸附具一套。

本机采用机电一体化设计，主要由测力传感器、变送器、微处理器、负荷驱动机构、计算机及彩色喷墨打印机构成。它具有宽广准确的加载速度和测力范围，对载荷、位移的测量和控制有较高的精度和灵敏度，还可以进行等速加载、等速位移的自动控制试验。落地式机型，造型涂装均充分考量了现代工业设计，人体工程学之相关原则。

Features: Using foreign advanced technology, full digital amplification, acquisition, display stability, high precision, easy to use. Adopts aluminum alloy cover, the main machine adopts DC or AC servo motor, precision reducer, high-precision lead screw, with smooth transmission, low noise, high speed accuracy, wide speed range, long service life and other characteristics; Liquid crystal real-time display, can display the test force, peak, displacement, speed, test state, etc., the appearance is generous, easy to use, simple operation; It has the functions of limit position, automatic overload protection, automatic stop of sample fracture and so on. Equipped with a set of standard stretch accessories.

The machine adopts electromechanical integration design, which is mainly composed of force sensor, transmitter, microprocessor, load driving mechanism, computer and color inkjet printer. It has a wide and accurate range of loading speed and force measurement, and has high accuracy and sensitivity to the measurement and control of load and displacement, and can also carry out automatic control tests of constant velocity loading and constant velocity displacement. Floor type models, modeling and painting are fully considered modern industrial design, ergonomics related principles.

主要功能：
主要对金属材料和非金属材料及零部件产品进行拉伸、压缩、弯曲、撕裂、90?剥离、180?剥离、剪切、粘合力、拔出力、延伸伸长率等试验，以及一些产品的特殊试验。

Main functions:

Mainly for metal materials and non-metal materials and parts products tensile, compression, bending, tearing, 90?peel, 180?peel, shear, adhesive force, drawing force, elongation elongation and other tests, as well as some special tests of products.

Function introduction:

Automatic shutdown After the sample is damaged, the moving beam automatically stops moving (or automatically returns to the initial position)

Automatic shift automatically switches to the appropriate range according to the size of the test force to ensure the accuracy of the measurement data

Conditional module Test conditions and sample raw data can be stored in the form of their own standard modules; Convenient for users to call and view, save test time automatic speed change

The displacement speed or loading speed of the automatic variable speed test process can be automatically completed according to the pre-prepared and set program or manually changed

Automatic saving After the test, the test data and curves are automatically saved by the computer to eliminate data loss caused by forgetting to save the disk

Test process The test process, measurement, display, analysis, etc. are completed by the microcomputer

Display mode Data and curves are dynamically displayed with the test process

Test software Chinese Windows user interface, easy to operate

The test report can be edited and printed according to user requirements

Batch test for the same parameters of the sample, a batch of tests can be completed after one setting

Automatic process according to the test requirements, users can easily establish their own test template (method, easy to call twice, can realize the test loading speed, stress, strain closed-loop test control

After the curve traversal test is completed, the curve can be amplified and analyzed again, and the corresponding data of each point on the test curve can be found with the mouse

Add test methods Users can add test methods according to the test requirements

Limit protection has two levels of programmed and mechanical limit protection

Overload protection When the load exceeds the rated value by 3 ~ 5%, automatic shutdown

The report displays both automatic and manual modes to obtain various test results, and automatically forms a report, which makes the data analysis process simple and convenient for users

公司承诺：

1.购机前，我们专门派技术人员为您设计的流程和方案

2.购机后，将免费指派技术人员为您调试安装

3.整机保修一年，产品终身维护

4.常年供应设备的易损件及耗品确保仪器能长期使用

5、售后管理：我公司实现计算机化管理，实行客户定期电话回访制度，定期复查设备的工作情况，定期电话指导用户对设备进行保养和检测，以便设备正常运转，跟踪客户的设备使用情况，以便及时对设备进行维护

6、物流情况：及时提供货源，确保全国范围内2-10内到货，持续稳定地为代理商做全面服务工作，提供合理的运作空间。公司有专业的技术人员为您安装指导。

7、软件升级：终生免费提供新版本控制软件。

8、安装培训:仪器包装内附有说明书，专业培训人员为客户指定操作者讲解仪器正常操作流程、操作注意事项及仪器的日常维护要求；也可以根据客户要求提供上门培训服务。

品质保证：

一年保修，终身维护！