供应

如何分辨矿用皮带扣的优劣？亲们可以从以下三点仔细对比：
How to distinguish the advantages and disadvantages of mining belt buckles? Here are three things 

you can compare:
1.看外表处理
除开不锈钢大都扣头不电镀外，此外的都通过轮廓措置，假设外貌出现撞伤、刮花、起泡、麻点、颜色不均、发

黄等景遇，等于不良出产品。
1. Look at the appearance of most stainless steel button head not electroplating, in addition to 

all through the contour processing, assuming the appearance of bumps, scratches, blistering, 

pockmarks, uneven color, yellowing and other scenery, equal to bad products.
2.看看手感
掂量下有没分量，一样平常十分轻的，那么质料也是以劣质资料为主、分量比照重的是比同类的好。譬如绝大一

部分兵工帆布带的扣头即是锌合金做的有份量，有质感。 　
2. Look at the feel of the heft under the weight, as usual very light, then the material is also 

based on inferior materials, compared to the weight is better than the same kind. For example, 

most of the military engineering canvas belt buckle is made of zinc alloy has weight, texture.　

如何分辨强力皮带扣的正反面
　刚接触强力皮带扣的朋友可能不知道怎么分辨强力皮带扣的正反面，分辨输送带扣的正反面How to tell the 

pros and cons of a powerful belt buckle. A friend who has just touched a powerful belt buckle may 

not know how to tell the pros and cons of a powerful belt buckle, or the pros and cons of a belt 

buckle

有以下三点：　　
1、强力皮带扣一个受左右扳手管---的起动轴套。
2、一个与起动轴套联动的弯形连杆和上连杆，一个与上连杆联动的滚轮，受弯形连杆控制的滑块，与滑块联动

的下连杆，这一面就是强力输送带扣的正面。
3、一端连接于上连杆另一端固定有弯钉块的压钉连杆，su2000皮带扣，连接下连杆另一端固定有顶钉块的连杆

板，使顶钉块平动的导轨板，受左右扳手管---的与导向齿轴离合的推箱体平移的棘爪、与导向齿轴离合控制箱

体运动步距的定距板，这一面是强力皮带扣的反面 。
 知道了怎么辨别皮带扣的优劣，开始进行您的选择吧！

There are three points: 1, a strong belt buckle by the left and right spanner tube —— The 

starting sleeve. 2. A curved connecting rod and an upper connecting rod in conjunction with the 

starting sleeve, a roller in conjunction with the upper connecting Rod, a slider controlled by the 

curved connecting Rod, and a lower connecting rod in conjunction with the sliding Rod, this side 

is the positive side of the powerful conveyor belt buckle. 3. One end of the connecting rod is 

connected to the nail pressing connecting Rod with a bent nail block fixed at the other end of the 

upper connecting rod; the SU2000 belt buckle is connected to the connecting rod plate with a top 

nail block fixed at the other end of the lower connecting rod; By the left and right spanner 

tube-with the guide gear shaft Clutch Push box translation pawl, and guide gear shaft Clutch 

Control Box Movement step distance of fixed distance plate, this side is the opposite side of the 

strong belt buckle. Now that you know how to tell the difference between a good belt buckle and a 

bad belt buckle, make your choice!
联系人：陈经理
地址：山东省济宁市任城区金宇路4号
手机：13165175381