二手设备

二手标量网络分析仪54147A  ANRITSU 熊生：13751228936
东莞市创源电子仪器有限公司
　   54100A系列网络分析仪可提供设备特性。设备包括：放大器、天线、适配器、RF电桥、电缆、波相传输线、接收器、衰减器、VCO、开关、耦合器、过滤器等。先进的软硬件特性可加速生产力和提高准确性。结合自动波段搜索功能加快调节速度。低源同步和高指向性SWR自动测试仪确保准确。 
★快速准确的测量传输、返回损耗及精确性返回损耗、SWR、群延迟、绝对功率和距离误差。
★晶体源特别稳定和准确。 
★内置自动化特征包括距离误差
★内置磁盘驱动
★结实可靠的机箱
★传输收益（损耗），群延迟和功率测量
★传输及返回损耗（或SWR）
★适配器、衰减器、终端、耦合器及RF电桥 
★54107A 纯量测试系统（0.001-1.5GHz） 
特点
    54100A系列网络分析仪可提供设备特性。设备包括：放大器、天线、适配器、RF电桥、电缆、波相传输线、接收器、衰减器、VCO、开关、耦合器、过滤器等。先进的软硬件特性可加速生产力和提高准确性。结合自动波段搜索功能加快调节速度。低源同步和高指向性SWR自动测试仪确保准确。 
★快速准确的测量传输、返回损耗及精确性返回损耗、SWR、群延迟、绝对功率和距离误差。
★晶体源特别稳定和准确。 
★内置自动化特征包括距离误差
★内置磁盘驱动
★结实可靠的机箱
★传输收益（损耗），群延迟和功率测量
★传输及返回损耗（或SWR）
★适配器、衰减器、终端、耦合器及RF电桥 
★54107A 纯量测试系统（0.001-1.5GHz） 
技术指标
Analyzer Measurement modes Transmission(dB),return loss(dB),SWR(linearSWR),optiona group delay(ns),power(dBm)precision return loss(dB) and optionaldistance-to-fault 
Dynamic range -55 to +16dBm,autozeroing with DC detection 
Inputs Three,two standard inputs,A and B,with optionathird reference channel,R(Option 5) 
Display channels Two channels are used to select and simultaneouslydisplay any two inputs fromA,B,or R.The inputs can also be displayed asratios A/R or B/R. 
Scale resolution 0.1 to 10dB(m) per division in 0.1dB steps 
Cursor functions Searches for trace maximum,minimum,dB level,dBbandwidth,next marker and active marker 
Averaging 2,4,8,16,32,64,128,or 256 
Limit lines Two limit ines,either single value or multilevel segmented,for each trace.Segmented lines may be made from up to 10individually editable segments. 
Auto-zero Performs an AC modulation cycle and lowlevel calibration during sweeper ratrace 
Save/Recall Thirteen sets of front panel set-ups andthirteen sets of trace memory can be stored in non-volatile instrument memory. 
Trace mask A swept frequency measurement can be storedto a graticule trace mask for visual comparison to later measurements. 
Disk drive Built-in 3.5 inch,1.44MB floppy disk drive 
Autosave Automatically increments the trace datafile name and reference number during successive data storage operationsto the DOS disk 
Source Frequency range 1Mhz to 110GHz,model dependent 
Alternate sweep Sweep alternately between frequenc yrangesset differently for channel 1 and channel 2 
CW Provides single frequency output(both channelsturned off) 
Frequency resolution Rf Model(54107A,54109A,54111A):10kHz,Microwavemodels:100khz 
Output power Maximum guaranteed levelled output poweris model dependent. 
Reverse power protection UP to 5 Watts.Limited to 1 Watt with attenuatoroption 
Appli-
cation function Min/Max hold Save the minimum and maximum values of successivesweeps or the combination of the two 
Cursor functions Automatic cursor seach updates the bandwidth,minimum,ormaximum levels of the displayed trace. 
Compression test automation Determines the gain compression point overthe operating freqeuncy range of an ampliffier by successively incrementingthe source power and measuring the amount of compression until a preset"X"dBlimit is exceeded. 
Self test Performs a self test every time power isapplied or when SELF TEST pushbutton is pressed.If an error is detected,adiagnostic code appears,identifying the cause and location of the error. 
General Operating temperature 0°to 50℃ 
Power 48 to 400Hz,300VA 
Mass 18kg(39lb.) 
Printer Parallel printer interface is compatiblewith the Canon BJ30,Bj200e,and most Epson FX-compatible printers. 
Transit case Hard shell case with custom foam inserts,PN:760-183 
EMC Meets European community requirements forCE marking 
订货信息 Model/Order No. Name 
Option 1 Options 
Rack mounting with slides 
Option 2 70dB RF step attenuator 
Option 2A 70dB,20Ghz MW step attenuator 
Option 2B 70dB,26.5GHz MW step attenuator 
Option 2C 70dB,40GHz MW step attenuator 
Option 2D 70dB,50GHz MW step attenuator 
Option 4 75Ω source output(available to 3.0GHz) 
Option 5 Add reference channel 
Option 6 Add external levelling 
Option 7 Internal distance-to-fault software 
Option 8 Internal relative group delay software 
Option 12 Add front panel cover 
Option 13 Add front mounted handles 
Option 16 +15V DC supply for millimeter wave source modules(availablewith<20GHz models only) 
Option 25 Maintenance manual 
Option 26 Extra operation and GPIB programming manual 
Option 33 Canon printer