产品

微机控制门尼粘度试验机  微机控制，数据显示，自动校准，

橡胶工业及科研单位理想的实验仪器。

Adopting imported intelligent digital temperature control instruments, it is easy to adjust and set, and has a wide temperature control range.

The microcomputer adopts imported chips,

High reliability,

All data can be automatically plotted, calculated, and printed.

微机控制门尼粘度试验机  测试报告

测试报告应包括以下内容；

A样品描述：

1样品及其来源的详细说明；

2从样品上制备试样的方法，例如：裁切或边辊；

B测试方法：

1本部分名称及编号；

2使用的测试程序；

3使用的试样类型；

B Test method:

1. Name and number of this section;

2. The testing program used;

3. Type of specimen used;

C测试描述：

1测试前的调节温度和时间；

2转子尺寸（大转子或小转子）

3测试温度和相对温度，如果要求；

4预热时间（如果不是1小时）；

5测试时间；

6模腔闭合力（如果不是11-5KN）；

7使用的热稳定薄膜，包括薄膜的厚度；

8详细说明任何与本部分中规定步骤不同一处；

D测试结果：

1门尼黏度测试结果；

2如果测试试样多于一个；

  试样数量；

  单个的测试结果；

  测试结果的平均值（如果测试试样多于一个）；

E测试日期。

符合标准：GB/T 1232《未硫化橡胶门尼粘度的测定》、GB/T1233《橡胶胶料初期硫化特性的测定 门尼粘度计法》及ISO289、ISO667等标准的要求。

技术参数：

※本参数仅供参考，如有改动恕不另行通知，以公司产品实物为准。

A电源540*660*1100mm

B外型尺寸540*660*1100mm

C重量210kg

D转子转速2?0.02r/min

E门尼值测量准确度?0.001个门尼值

F温度调节范围室温--200℃

G模腔温度波动?0.5℃

H门尼值测量范围满量程200个门尼值

I门尼值分辨率0.001个门尼值

E Test date.

Compliance with standards: GB/T 1232 "Determination of Mooney viscosity of uncured rubber", GB/T 1233 "Determination of initial vulcanization characteristics of rubber compounds Mooney viscometer method", and ISO289, ISO667 and other standards.

采用进口智能数字式温控仪表，调整设定简便，控温范围宽。

微机采用进口芯片，

可靠性高，

全部数据可自动绘图计算、打印。

Microcomputer control, data display, automatic calibration,

Ideal experimental equipment for rubber industry and research institutions.

Test report

The test report should include the following content;

Sample description:

A detailed description of the sample and its source;

2. Method of preparing samples from samples, such as cutting or edge rolling;

C Test Description:

1. Adjust the temperature and time before testing;

2 rotor size (large or small rotor)

3. Test temperature and relative temperature, if required;

4 preheating time (if not 1 hour);

5 Test time;

6 mold cavity closing force (if not 11-5KN);

7. The thermal stable film used, including the thickness of the film;

8. Provide a detailed explanation of any differences from the steps specified in this section;

D test results:

1. Mooney viscosity test results;

If there is more than one test sample;

Number of samples;

Individual test results;

The average value of the test results (if there is more than one test sample);

Technical parameters:

※This parameter is for reference only and is subject to change without prior notice. The actual product of the company shall prevail.

A power supply 540 * 660 * 1100mm

B Overall size 540 * 660 * 1100mm

C Weight 210kg

D rotor speed 2?0.02r/min

E Mooney value measurement accuracy?0.001 Mooney values

F temperature adjustment range: room temperature -200℃

Temperature fluctuation of G mold cavity?0.5℃

H Mooney value measurement range: 200 Mooney values in full scale

I Mooney value resolution 0.001 Mooney values