产品

GD-150C机床采用头尾架两顶的结构方式，自动刃磨外径2- 120mm，长度小于300mm的外圆、外锥面及倒角。1、机床采用新代伺服控制系统，并配置专用段差磨削程序，配置在线修整装置。工件头架采用日本NSK精密主轴轴承，砂轮发蓝能同时装2片砂轮，满足一次装夹完成粗、精磨的工艺需求。2、机床配置自动冷却装置和吸雾装置、自动灭火装置、冷却系统异常保护程序、报警蜂鸣器，机床正面活动拉门、左右及后面有维修门，摆动式按钮，工人专用启停按钮。 

GD-150C
砂轮架左右移动有效行程X轴 Left and Right Effective Travelling of Grinding Wheel Frame X-axis X-axis	350 mm
砂轮架前后移动有效行程Y轴 Feed and Back Effective Travelling of Grinding Wheel Frame Y-axis	180 mm
砂轮轴转速（变频调速）Rotation Speed of Grinding Wheel Frame (Frequency Conversion and Adjusted Speed)	1000～3000rpm
砂轮线速度 Linear Velocity of Grinding Wheel	18～54m/s
砂轮主轴功率 Spindle Power of Grinding Wheel	4KW
砂轮尺寸（金刚石砂轮）Grinding Wheel Size (Diamond Grinding Wheel)	350?127?20/65
工件头架中心高 Centre Height of Workpiece Head Stock	105mm
工件头架A轴转速（变频调速）A-axis Rotation Speed of Workpiece Head Stock (Frequency Conversion and Adjusted Speed)	0-500rpm
工件头架锥孔 Bore-Hole of Workpiece Head Stock	Is050
工作台水平面内凋整角度（配有千分表微调安装附件）Adjusted Angle in Horizontal Plane of Work table (Has Dial Gage to install attachment)	10?/-10?每格读数值为0.5?
工件头架水平面内凋整角度 Adjusted Angle in Horizontal Plane of Work Head Stock	70?/-70?每格读数值为1?
工件磨削直径范围 Grinding Diameter Range of Workpiece	Φ2—Φ120mm
工件磨削最大长度 Grinding Max. Length of Workpiece	300mrn
工件主轴径向跳动 Workpiece Spindle Redial Runout	≤0.005mm
磨头主轴径向跳动 Grinding Head Spindle Redial Runout	≤0.005mm
X轴分辨率 X-axis Resolving Power	0.00lmm
Y轴分辨率 Y-axis Resolving Power	0.00lmm
机床外形尺寸 Machine Size	1800?1650?1750
机床重量 Machine Weight	2.5T